Laser rubber is the raw material behind every rubber stamp die. EPRESS laser rubber sheets are formulated for CO2 laser engravers: they engrave with crisp shoulders, hold fine text down to small point sizes, and produce far less odor than generic rubber — a real advantage for workshops and stamp shops.
Sheets come in A4 (210×297 mm) and can be cut to custom sizes. The 2.3 mm engraving-grade thickness suits standard self-inking stamp dies, and we supply volume pricing for stamp manufacturers and laser-service shops.
Proven moulds, no tooling cost. Full spec sheets and pricing on request.
Engraving-grade laser rubber for CO2 machines — full test reports available with your quote.
| Material | Engraving-grade laser rubber, low-odor formula |
|---|---|
| Sheet Size | A4 (210 × 297 mm); custom sizes and pre-cut plates available |
| Thickness | 2.3 mm standard for self-inking stamp dies; other thicknesses on request |
| Shore Hardness | Shore A grade for stamp dies — tell us your target hardness when ordering; custom hardness on request |
| Compatible Laser | CO2 laser engravers (40 W and above recommended); not for diode / fiber lasers |
| Engraving Quality | Crisp shoulders, sharp edges, fine text down to small point sizes |
| Odor / Smoke | Low-odor, low-smoke vs generic rubber — extraction still recommended |
| Surface | Uniform surface for consistent engraving depth across the sheet |
| Ink Compatibility | Suitable for self-inking stamp dies used with standard stamp inks |
| Packaging | Single sheets, 20-sheet workshop packs, private-label packs and export cartons |
| MOQ | 100 sheets (mixed sizes negotiable) |
| Sample | Available — ships in 2 working days |
Stamp shops and laser-service workshops run our sheets daily. What they reorder for:
Sheets pre-cut to your common die sizes (L-CUT service) — less waste, faster plate production.
Custom thickness and hardness available on volume orders — tell us your engraving machine and die requirements.
Your brand, SKUs and barcodes on packs and cartons — full private-label program for material resellers.
20-sheet workshop packs, export cartons, FOB / CIF / DDP terms, export docs handled.
Any CO2 laser engraver (40 W and above recommended). Diode and fiber lasers are not suitable for rubber engraving. We can share starting speed/power settings for common machines.
Our low-odor formula reduces the burnt-rubber smell significantly, but you should still use extraction or good ventilation — as with any laser rubber.
2.3 mm is the standard for most self-inking stamp dies. For deep-relief or craft stamps, ask us about other thickness options.
Yes. For regular orders we can pre-cut sheets to your common plate sizes, which reduces waste and speeds up your production.
Send your size, quantity and artwork — we usually reply within 8–12 working hours.
Factory-direct pricing & free design mockup.
We usually reply within 8–12 working hours.
